Installation and Operation, cont’d

Rack mounting procedures

The unit can be mounted in the front or rear of any of these rack systems:

•RSF 123 rack shelf kit for 3.5" deep products (part #60-190-20)

•RSB 123 basic rack shelf kit for 3.5" deep products (part #60-604-20)

•RSU 126 universal rack shelf kit for 6" deep products (part #60-190-10)

•RSB 126 basic rack shelf kit for 6" deep products (part #60-604-10)

•RSU 129 universal rack shelf kit for 9.5" deep products (part #60-190-01)

•RSB 129 basic rack shelf kit for 9.5" deep products (part #60-604-01)

To rack mount the EDID 101D/EDID 101V:

1.If necessary, remove the rubber feet.

2.Secure the EDID 101 to the shelf with two 4-40 x 3/16" screws in opposite corners of the base (see below).

3.Install false faceplate(s) or other unit(s) to the rack shelf.

4.Attach the shelf to the rack with the four provided 10-32 x 3/4" bolts.

1/4 Rack Width Front False Faceplate

Use 2 mounting holes on opposite corners.

(2)4-40 x 3/16" Screws

Rack mounting the EDID 101

6EDID 101D/EDID 101V • Installation and Operation