Extron electronic EDID 101V, EDID 101D user manual Introduction, Edid 101 Features

Page 6

Introduction

EDID 101 Features

EDID Minder — Enables continuous EDID communication to the input source. EDID provides information about a display identity. The EDID Minder continuous EDID communication helps ensure the source boots up properly and reliably outputs content to the display.

EDID Record — Enables the device to record EDID directly from a display.

Pre-programmed EDID — The EDID 101 contains pre‑programmed EDIDs with the most common display native resolutions for both 50 and 60 Hz. Along with the native rate, each pre-programmed EDID also lists other common video rates for use by the video source.

NConfiguring the EDID 101 rotary and DIP switches allow a user to select a pre-programmed EDID based on the native rate of a display (i.e. 1280x1024 @ 60 Hz) and a desired signal type (i.e. digital), but does not necessarily force a video source to output that rate. Since EDID is not limited to reporting a single video rate (i.e. the native rate), each Extron EDID also lists other common video rates for use by the video source.

Powered from the video source — The EDID 101 is powered from a VGA or DVI video source for normal operation. An optional external 12 VDC power supply for remote learning capability is also available.

Power LED — The side panel LED illuminates green when power is connected and flashes red during EDID recording.

Compact size — Small form factor enables use in places where space is a premium.

2EDID 101D/EDID 101V • Introduction

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Edid 101D & Edid Edid Emulator with Edid MinderPrecautions Safety Instructions EnglishFCC Class a Notice Vcci Class a notice for ITE productsTable of Contents About this Manual About the EdidEdid 101 Features IntroductionTypical Edid 101 applications Introduction, cont’d PC EdidRack mounting Tabletop placementMounting the Edid UL guidelines for rack mountingInstallation and Operation, cont’d Rack mounting proceduresFurniture mounting Mounting the Edid 101 under a deskInstallation and Operation, cont’d Panel Features Side panelConnector Front and rear panelsApply power to the Edid 101 by connecting a power source Recording a display EdidUsing the pre-programmed Extron Edid Rotary Switch Resolution PositionSpecifications Reference MaterialSome VGA source devices do not provide power output GeneralAccessories Reference Material, cont’d Included PartsExtron Warranty USA, Canada, South America Central America JapanExtron Electronics. All rights reserved
Top Page Image Contents