Chapter 2: Overview
|
| Table | |
|
|
| |
Number | Component | Description | |
|
|
| |
|
| Disables (mutes) video to selected channels. | |
8 | Function Key — OFF | • Press the OFF button followed by any destination channel. | |
• Press button 1 through 4 to select the output destination. The display will show “0” for the selected channel indicating no video | |||
|
| ||
|
| selected. | |
|
|
|
9Function Key — RECALL (preview)
The system will show previously stored presets, up to a total of 16. Presets are stored in local memory using Source keys 1 through 4 or Destination keys 1 through 4 as the memory preset location.
•Press the RECALL button.
•Press 1 through 4 on either Source or Destination row.
•Press ENTER. The preset configuration will execute. Operation completes.
NOTE: Operation will abort if no keys are pressed within 5 seconds.
10 | Function | Press ENTER to confirm entries. | |
DEMO) | |||
|
| ||
|
|
|
11Function
The system will store presets, up to a total of 8. Presets are stored in local memory using Source keys 1 through 4 or Destination keys 1 through 4 as the memory preset location.
•Configure desired matrices.
•Press the memory button.
•Press 1 through 4 on either Source or Destination row.
•Press ENTER to ready memory location.
•Or press MEMORY again to cancel operation.
Operation completes.
NOTE: Operation will abort if no keys are pressed within 5 seconds.
12 | Function Key — LOCK | • Press and hold the LOCK button for two seconds to lock out the front panel. | |
• Press and hold the LOCK button for two seconds to | |||
|
| ||
|
|
| |
13 | Function Key — EDID | Press EDID to select new EDID mode and select source button #1 or #2 to change embedded EDID mode. | |
|
|
| |
14 | 19" rackmount ears | Converts a desktop switch to a | |
|
|
|
2.4.2 Rear Panel
6 | 4 | 5 | 3 | 2 | 1 |
Figure 2-3. Rear panel.
Page 11 |