Chapter 4: Operation
4.8 Front-Panel Control Functions
See Chapter 2.
4.9 Remote Control
Before making any connections to the switch, observe the following:
•Make sure that the voltage supply matches the label on the supplied plug (±10%).
•Make sure that the power switch is OFF.
•Make sure that all system grounds are connected to a common point.
•Avoid powering equipment with a system from multiple power sources that may be separated by large distances.
•Connect all audio video sources and destination equipment.
•Power on all source and destination
•For each destination output, select the appropriate input source by using the
IR remote control, or through the
•On powerup, the switch will return to its last used setting before it was powered down.
POWER
1
ON OFF
1 2 3 4
DESTINATION
1 2 3 4
SOURCES
ALL OFF EDID
LOCK RECALL MEMORY ENTER
4x4 HDMI MATRIX SWITCH
2
3
4
5
Table 4-8. IR Remote Control Key.
Number
in Figure
1Switch Power ON
2Switch Power OFF
Destination:
3the destination button to select the output display channel.
Source:
4Press input
Function Key:
ALL: function selection button
OFF: function selection button
EDID: function selection button
5LOCK: function selection button
RECALL: function selection button
MEMORY: function selection button
ENTER: function selection button
Figure 4-1. IR remote.
Page 18 |