Chapter 4: Operation
2 3 |
1 4 |
200 ±20 mm
3.5
1 6
DC 2.5 |
5 9 DB9 F
Pinout
DC 2.5 | DB9 F |
1—
2—
3—
4—
—
Figure 4-5. DB9 to 2.5-mm cable pinout.
4.4 Function Button (AVSW-HDMI4X1A Only)
The Function button adjusts the optimal video signal strength corresponding to the length or quality of DVI cable.
To adjust the video signal strength, follow these steps:
1.Press the Function button three times.
2.Press push button #1 one or two times to adjust the selected port’s input video strength. One beep = normal or two beeps = enhance.
or
Press push button #3 one or two times to adjust the selected port’s output current. One beep = normal or two beeps = enhance.
or
Press push button #4 one, two, three, or four times to adjust the selected port’s output emphasis. One beep = no
3.Once the setting is finished, press the Function button one time to exit the setting.
| Page 19 | |
|