A&D FX-120i/FX-200i/FX-300i/FX1200i/FX2000i/FX3000i Baud rate, Data bit, parity bit, Interface

Class	Item and Parameter			Description
		0	600 bps
		1	1200 bps
	bp5	2	2400 bps
	Baud rate	3	4800 bps
		4	9600 bps
		5	19200 bps
		0	7 bits, even
	btpr
		1	7 bits, odd
	Data bit, parity bit
		2	8 bits, none
5if	Crlf	0	CR LF		CR: ASCII code 0Dh
Serial	Terminator	1	CR		LF: ASCII code 0Ah
interface		0	A&D standard format
		1	DP format
	type	2	KF format		Refer to “9-6 Description of the Item
	Data format	3	MT format		“Data Format””.
		4	NU format
		5	CSV format

	t-Up	0			No limit	Selects the wait time to receive a
	Timeout		1		1 second	command.
	erCd			0	No output	AK:ASCII code 06h
	AK, Error code	1			Output
mltMLT		Sets an arbitrary coefficient.				Available only when programmable-
Programmable-unit (Multi-unit)						unit mode is selected.
Unit		Refer to “4. WEIGHING UNITS”.
Unit
id		Refer to “10. ID NUMBER AND GLP REPORT”
ID number
	apf			0	Normal weighing mode
		1			Capacity indicator
	Application function
		2			Statistical calculation mode
				0	Number of data, sum
ap fnc					Number of data, sum, maximum,
		1
Application 5taf					minimum, average, range
					(maximum-minimum)
	Statistical function
					Number of data, sum, maximum,
	mode output items

2minimum, average, range (maximum-minimum), standard

deviation, coefficient of variation

: Factory settings.

Caution

The balance may not transmit the data completely at the specified refresh rate, depending on the baud rate.

When a refresh rate of 20 times/second is used, set the baud rate to 4800 bps or higher.

33