Manuals / A&D / Personal Care / Scale

A&D FX-120i/FX-200i/FX-300i/FX1200i/FX2000i/FX3000i Zero tracking trc, Trc, Decimal point pnt

Models: FX-120i/FX-200i/FX-300i/FX1200i/FX2000i/FX3000i

1 72

Download 72 pages 26.17 Kb

Page 37

Zero tracking ( trc )

This function tracks zero point drift caused by changes in the environment and stabilizes the zero point. When the weight data is only a few digits, turn the function off for accurate weighing.

Note

Digit, when used for the FX-i series balance, indicates a unit of minimum weighing value.

trc 0		The tracking function is not used. Used for weighing a very light sample.
trc 1		The tracking function is used. Normal zero tracking.
trc	2	The tracking function is used. Strong zero tracking.
trc	3	The tracking function is used. Very strong zero tracking.

Display refresh rate ( 5pd )

Period to refresh the display. This parameter influences “Stream mode” along with “Baud rate” and “Data output pause”

Note

This item is selected automatically when the response rate is changed.

Decimal point ( pnt )

The decimal point format can be selected.

Auto display-ON ( p-on)

When the AC adapter is connected, the display is automatically turned on in the weighing mode, without the ON:OFF key operation. Used when the balance is built into an automated system. 30-minute warm up is necessary for accurate weighing.

Auto display-OFF ( poff )

When the AC adapter is connected and no operation is performed (inactivity state) for 10 minutes, the display is automatically turned off and the standby indicator is illuminated.

35

Image 37

A&D FX-120i/FX-200i/FX-300i/FX1200i/FX2000i/FX3000i Zero tracking trc, Trc, Display refresh rate 5pd, Decimal point pnt

Contents

WM+PD4001199 RI SPage Contents RS-232C Serial Interface MaintenanceConnection to Peripheral Equipment External Dimens Ions Introduction FeaturesAbout This Manual Compliance Unpacking Unpacking the Balance Installing the Balance Before Use PrecautionsDuring Use After Use Power Supply Display symbols Display Symbols and Key OperationKey operation Function Table Units Weighing Units Capacity Sample Storing UnitsRE-ZERO Weighing Basic Operation Gram Mode Selecting the counting mode Counting Mode PCSStoring a sample unit mass Counting operation Counting mode using the Acai function Selecting the percent mode Percent Mode %Storing the 100% reference mass Reading the percentage Getting Started Statistical Calculation Mode Selecting the unit Selecting the statistical items to outputMode Print Outputting the statistical results Clearing the statistical data Deleting the latest data Enabling the statistical calculation mode Statistical Calculation Mode Example of UseReturning to the weighing mode Changing the function table Using The Statistical Calculation Mode Operation Response AdjustmentFast MID Slow Calibration Calibration ModeTerms Display CAL Calibration Using an External Weight End Calibration Test Using an External Weight Glp1 Switches Operation Function Switch and InitializationPermit or Inhibit Initializing the Balance Structure and Sequence of the Function Table Function TableDisplay and Keys Example Details of the Function Table Auto print polarity Data output modeAuto print difference Data output AK, Error code TimeoutMode output items Factory settings Description of the Class Environment, Display Hold function Hold Animal weighing modeCondition Cond Cond Trc Zero tracking trcDisplay refresh rate 5pd Decimal point pnt Description of the Item Data Output Mode Description of the Item Data Format Interval output modeStandard format DP Dump print format 5if type MT format KF format 5if typeNU numerical format CSV format 5if type Data Format Examples Statistical calculation mode apf Capacity indicator apfDescription of the Item Application Function Comparator Function Setting example ID Number and GLP Report Setting the ID NumberGLP Report Display character set Calibration test report using an external weight Calibration report using an external weight Title block and end block Underhook PROGRAMMABLE-UNIT Sub 9-pin assignments RS-232C Serial Interface Connection to the AD-8121B Printer Connection to Peripheral EquipmentOFF Connection to a Computer Using Windows Communication Tools WinCTRsCom RsKey Using the WinCT software, the balance can do the following Command List CommandsCommands to query weight data Commands to control the balance Acknowledge Code and Error Codes Settings Related to RS-232C Maintenance Checking the Balance Performance and Environment TroubleshootingChecking that the balance performs properly Error Codes Asking For Repair Options Page FX-300i Specifications FX-120i / 200i External DimensionsFX-1200i / 2000i GLP TERMS/INDEX Stabilization indicator Index Keys and symbols ON/OFF key Sample keyCapacity indicator Condition Counting mode Digit 31, 35 NET indicatorFXi-02 FXi-08 FXi-09 FXi-10 FXi-11 GLP output 23, 25, 26, 32 Parity Pcs Stability band width Stop bit Stream modePermit Printer Memo Memo Memo Page Korea Limited German Scales Office