A&D FX-120i/FX-200i/FX-300i/FX1200i/FX2000i/FX3000i Selecting the statistical items to output

Selecting the statistical items to output

5 Press the SAMPLE key to display 5taf 0

.

6 Press the RE-ZERO key to select the output items.

In the example, 5taf 1 is selected to output the number of data, sum, maximum, minimum, range (maximum-minimum) and average.

Parameter		Description
	0	Number of data, sum
1		Number of data, sum
		Maximum, minimum, range (maximum – minimum), average
		Number of data, sum
2		Maximum, minimum, range (maximum – minimum), average,
		Standard deviation, coefficient of variation

7 Press the PRINT key to store the setting.

Note

The statistical calculation mode will be enabled using the

ON:OFF key or when the power is turned on.

8 Press the CAL key to return to the weighing mode.

Selecting the unit

9 Press the MODE key to select the unit to be used for the statistical calculation mode.

Notes

Selecting the unit using the MODE key is not available after the data is entered. In this case, clear the data as described on page 19 and select the unit using the MODE key.

When the statistical calculation mode is to be enabled upon power-on, select the unit in “Unit (Unit)” of the function table beforehand.

5-4-2 Using The Statistical Calculation Mode Entering data for statistical calculation

Use the following keys to operate the statistical calculation mode.

MODE		key				...............			When the data is entered, moves between the displaying items (weighing mode,
										statistical results and data operation) each time the key is pressed.
									When no data has been entered, selects the unit.
SAMPLE				key				Turns the minimum display on or off, in the weighing mode.
							...........
RE-ZERO					key			Sets the display to zero in the weighing mode.
						................
PRINT		key								Outputs the data number and the weight data and includes the weight data to
										statistical calculation in the weighing mode. (Output is not in the data format
										specified in the function table because of the data number added.)
										Outputs the statistical results while the statistical results are displayed. (Output
										is not in the data format specified in the function table.)
			....................
CAL	key							Returns to the weighing mode.

17