9-5 Description of the Item “Data Output Mode”
The parameter setting of the “Data output mode ( prt )” applies to the performance when the data is transmitted using the
Key mode
When the PRINT key is pressed with the stabilization indictor turned on, the balance outputs the weight data and the display blinks one time.
Required setting dout prt 0 Key mode
Auto print modes A and B
When the displayed value is stable and the conditions of “Auto print polarity”, “Auto print difference” and reference value are met, the balance outputs the weight data.
When the PRINT key is pressed with the stabilization indictor turned on, the balance outputs the data and the display blinks one time.
Mode A: Required setting | dout | prt 1 | Auto print mode A (reference = zero) |
| dout | Auto print polarity | |
| dout | Auto print difference | |
Example | “For outputting the weight value each time a sample is added, with | ||
| |||
Mode B: Required setting | dout | prt 2 | Auto print mode B (reference = last stable value) |
| dout | Auto print polarity | |
| dout | Auto print difference | |
Example | “For outputting the weight value while a sample is added.” | ||
Stream mode
The balance outputs the weight data continuously regardless of the display condition. The display does not blink in this mode.
Required setting | dout | prt 3 | Stream mode |
| ba5fnc | 5pd | Display refresh rate |
| 5if | bp5 | Baud rate |
Example | “For monitoring data on a computer” | ||
Caution
The balance may not transmit the data completely at the specified refresh rate and baud rate. Set the baud rate higher.
Key mode B
When the PRINT key is pressed, the balance outputs the weight data, regardless of the display condition. The display does not blink in this mode.
Key mode C
When the PRINT key is pressed with the stabilization indictor turned on, the balance outputs the weight data. When the stabilization indicator is not on, the balance waits for the indicator to turn on and outputs the data. The balance blinks one time in this mode.
36
