5Confirm that there is nothing on the pan and press the PRINT key. The balance measures the zero point and displays the measured value. Do not allow vibration or drafts to affect the balance.
The balance displays the target weight value.
6Place the displayed target weight on the pan and press the PRINT key. The balance measures the target weight and displays the measured value. Do not allow vibration or drafts to affect the balance.
7The balance displays pan.
end . Remove the weight from the
8When the GLP output is set, the balance displays and outputs “Calibration Test Report”.
glp1
9The balance will automatically return to the weighing mode.
27
