A&D FX-120i/FX-200i/FX-300i/FX1200i/FX2000i/FX3000i Details of the Function Table

9-3 Details of the Function Table

Class	Item and Parameter				Description
		0	Fast response, sensitive value
	Cond				FAST		With “Hold 1”, sets the averaging
		1
						MID.
	Condition	2	Slow response, stable value				time.
				SLOW
	5t-b	0	Stable range is ±1 digit				The stabilization indicator illuminates
		1					when the display fluctuation is
							within the range. With “Hold 1”,
	Stability band width
		2	Stable range is ±3 digits
							sets the stabilization range.
	Hold	0	OFF				Holds the display when stable in animal
	Hold function	1	ON				mode. With “Hold 1”,	ANIMAL	turns on.
		0	OFF
	trc	1	Normal				Keeps zero display by tracking zero
	Zero tracking	2	Strong				drift.
ba5fnc		3	Very strong
Environment		0	5 times/second
	5pd
Display	Display refresh rate	1	10 times/second				Period to refresh the display
		2	20 times/second
	pnt	0	Point (.)				Decimal point format
	Decimal point	1	Comma (,)
	p-on	0	OFF				Turns on the weighing mode display
	Auto display-ON	1	ON				when the AC adapter is connected.
	poff	0	OFF				Turns off the display after 10 minutes
	Auto display-OFF	1	ON (10 minutes)				of inactivity.
	rng	0	Displays				Select whether or not to display the
	Display at start	1	Does not display				minimum weighing value at weighing
							start.
	beep	0	Does not sound				Select whether or not to sound the
	Beep	1	Sounds				beep when operating on keys.
		0	No comparison
	Cp	1	Comparison, excluding "near zero" when stable value or overloaded
		2	Comparison, including "near zero" when stable value or overloaded
	Comparator mode
		3	Continuous comparison, excluding "near zero"

Cp fnc		4				Continuous comparison, including "near zero"
	bep-				0	ON
Comparator
	LO buzzer	1				OFF
	bep-				0	ON
	OK buzzer	1				OFF
	bep-				0	ON
	HI buzzer	1				OFF
Cp Hi
Upper limit				Refer to “9-9 Comparator Function”.
Cp lo
Lower limit
			: Factory settings. Digit is a unit of minimum weighing value

31