A&D FX-120i/FX-200i/FX-300i/FX1200i/FX2000i/FX3000i Data output mode, Auto print polarity

Class	Item and Parameter			Description
		0	Key mode		Accepts the	PRINT	key only when
					the display is stable.
		1	Auto print mode A		Outputs data when the display is
			(Reference = zero)
					stable and conditions of ap-p, ap-b
			Auto print mode B
		2			and the reference value are met.
	prt		(Reference = last stable value)
	Data output mode	3	Stream mode		Outputs data continuously.
		4	Key mode B (Immediately)		Accepts the	PRINT	key regardless
					of the display condition.
					Accepts the	PRINT	key immediately
		5	Key mode C (When stable)		when the display is stable, or waits
					for the display to be stable when not.
		6	Interval output mode		Uses interval output mode.
		0	Plus only		Displayed value>Reference
	ap-p
		1	Minus only		Displayed value<Reference
	Auto print polarity
		2	Both		Regardless of displayed value
	ap-b	0	10 digits		Difference between reference value
		1	100 digits
					and displayed value
	Auto print difference
dout		2	1000 digits
Data output		0	Every measurement
		1	2 seconds

	2		5 seconds
int	3		10 seconds	Interval time for the interval output
Interval time	4		30 seconds	mode
				(With	prt 6
	5		1 minute		)
	6		2 minute
	7		5 minute
	8		10 minute
pU5e		0	No pause	Selects the data output interval.
Data output pause	1		Pause (1.6 seconds)
at-f		0	Not used	Selects whether or not automatic
Auto feed	1		Used	feed is performed.
info		0	No output
	1		AD-8121 format	Selects GLP output method.
GLP output
	2		General data format
ar-d		0	Not used	Adjusts zero automatically after data
Zero after output	1		Used	is output

Factory settings. Digit is a unit of minimum weighing value

32