Remote Start Features
Pit Stop Mode
To exit vehicle with engine running
The system keeps the engine running during short trips into the house or convenience store. To perform Pit Stop:
1.With the engine running, set the parking brake and release the foot brake.
2.Press the 
button, the parking lights will turn on and the REMOTE START ON message will play on the remote control.
3.Turn the key to off, and remove it from the ignition, the engine continues running for the programmed runtime.
4.Exit the vehicle and arm the alarm.
Note For Pit Stop on manual transmission vehicles follow the direc- tions in the Manual Transmission Start (MTS mode) section.
Key Takeover
When you are ready to drive
The system keeps the engine running until the vehicle is ready to be driven. To perform Key Takeover:
1.Disarm the system and enter the vehicle, do not step on the foot brake.
2.Insert the key, turn it to the run position, and then step on the foot brake, the remote start then turns off.
3.The parking lights turn off to indicate remote start is off, and
34 | © 2011 Directed Electronics. All rights reserved. |
