SENSOR WARN

Full Silent Arm Protection

Sensor Warn-away, Sensor Full Trigger and Point of Entry activations will only send messages to the remote, with parking light flash and siren outputs defeated.

Sensor Warn-away Messages

When the remote receives a Sensor Warn-away message it emits 10 beeps (if on) and displays a sensor zone specific text for 30 seconds. Warn-away messages cannot be reviewed or displayed in reports.

Full Trigger Messages

A Full Trigger message generates a Full Trigger output of siren tones and zone specific TRIGGER text followed by an alert that consists of 1 long beep per minute for 10 minutes.

To stop the output and alert, press a command button to perform a command, or Press the button.

Emergency Override

The following procedure disarms the system when a programmed re- mote is not available. Number of presses__________

1.Turn the ignition On.

2.Press the control button on the Control Center the correct number of times (the default is 1 press).

3.After a few seconds the siren output ceases and the system is disarmed.

Feature Details

Note As a precaution, if programmed for Passive Arming or Auto re-arming the system should be placed into Valet Mode until a remote is available .

© 2011 Directed Electronics. All rights reserved.

31

Page 34
Image 34
Clifford 570.4X manual Full Silent Arm Protection, Sensor Warn-away Messages, Full Trigger Messages, Emergency Override