Remote Start Error
For user safety, the system must be properly configured or remote start will not activate. Refer to the table below for the screens and parking light flashes that will identify the configuration issue and resolution.
Flashes * | Possible Fault | Solution |
5 | Brake on | Release foot brake |
|
|
|
6 | Hood open | Close hood |
|
|
|
7 | After performing Remote Start | Enable MTS mode |
| command - MTS not enabled |
|
| After performing Timer Start or | Check all Solutions |
| Smart Start command |
|
|
|
|
8 | Toggle Switch off | Turn switch on |
|
|
|
None | Alarm is triggered | Disarm or reset alarm |
|
|
|
* Refers to the number of parking light flashes.
Feature Details
© 2011 Directed Electronics. All rights reserved. | 39 |
