Status Screen Icons | Clifford 570.4X instruction

Status Screen Icons

Status Screen

Icons

ALL

1

Text Field

The table below describes all the status screen icons.

Remote Start Siren StatusSystem Status

Icon Description

Armed: The system is Armed, the alarm is enabled.

Locked: The system is Locked in Valet, the alarm is disabled.

Disarmed: The system is Disarmed, the alarm is disabled.

Unlocked: The system is Unlocked in Valet, the alarm is dis- abled.

Siren is disabled for sensor triggers; remote is paged for all trig- gers (Sensor Silent Arm).

	+ ALL	Siren is disabled for all triggers; remote is paged for all triggers
	+ ALL	(Full Silent Arm).
		(Full Silent Arm).

Remote start is active, the engine is running.

Timer Start is On; Remote Start is On.

Note: When the icon is without an arrow head: Timer Start is

enabled: Remote Start is Off

8	© 2011 Directed Electronics. All rights reserved.

Image 11

Clifford 570.4X manual Status Screen Icons, Table below describes all the status screen icons

Contents

Page Congratulations What you get Important information Government Regulations and Safety informationYour Warranty Replacement remote controls Contents Page Page Getting Started Charging the remote control At a Glance Keys to using this manualCan be located through the table of contents Function button Responder LC 2-Way At a Control Center Table below describes all the status screen icons Status Screen Icons Remote Start Zone Status Feature menus Performing Commands Using your SystemCommands and Conﬁrmations Fault Condition Alerts Responder LC Command table Directed Electronics. All rights reserved Disarm Basic Commands Direct AccessArm Remote Start AUX/Trunk Press and release the button 1 time Advanced Commands LevelSilent Arm Silent Disarm Press and hold the button Runtime ResetIf set to display runtime Commands Temp Request Press and release the button 2 times Sensor BypassRemote Valet Runtime Remaining Timer Startﬁrm and the Remote start status icons update Commands Press and release the button 3 times Sensor Silent ArmCar ﬁnder Smart Start Alarm Report Press and release the button 4 times Full Silent ArmDefogger Button operation Access menu itemsResponder LC Conﬁguration Navigating menus and options Button followed by Setup Remote menu Keypad LockMain Menu Mode Remote Start Info Alert Temp Unit Runtime AlertCar Screen Color Clock Set Sensor AdjustButton Beep System Type Menu Pair Remote Power Off Demo mode Sensor Silent Arm protection Alarm FeaturesNormal Arm Protection Emergency Override Full Silent Arm ProtectionSensor Warn-away Messages Full Trigger Messages Alarm Report when disarming Trigger Zone Fault Report Nuisance Prevention NPC Alarm Report when requested Key Takeover Remote Start FeaturesPit Stop Mode Advanced Start Remote Start Safe-lockDisabling Remote Start Smart Start operation Temperature ReportingTimer Start operation Start the engine and the text and tones play as an alert Manual Transmission Start MTS modeRemote Start Time-out Alert Turbo Timer Mode Remote Start Error Onetime Bypass Remote and System OperationsPassive Arming Auto Re-arming Rapid Resume Valet ModePower Save Automatic Remote Updates No Remote Output Feature not AvailableOut of Range Way Way Companion Remote Control Car Select Using the 1 way companion remoteAccessing Commands Button Auto Lock Programming Remote Features menu Tray while gently prying the tray Battery Information 1-WayRemote control housing Polarity, replace the old battery System Expansion Options Auxiliary Channels Driver door priority unlocking Low Battery Battery Information Responder LC Battery Life Battery Disposal Document Terminology Control Module Glossary of Terms Patent Information Government Regulations Remote Controls Control Center Safety Manual Transmission Vehicles InstallationRemote Start Capable Operation of the Remote Start Module if the Vehicle Starts Water/Heat Resistance Upgrades and BatteriesInterference Limited lifetime consumer warranty Directed Electronics. All rights reserved