Basic Commands (Direct Access)
Arm
Press and release
6:30
The alarm arms, doors lock (if connected), and the siren
chirps and parking lights flash once. The ARMED text and beeps play to confirm and the System Status Icons update. If Valet mode* is On, the doors lock and the VALET text and tone play. Exit Valet mode to arm the alarm normally.
If a trigger zone fault is detected the siren chirps once again and the Trigger Zone Fault report** plays.
To Arm and Panic
Press and hold
The alarm Arms (or Locks in Valet) and, after 2 seconds, sounds
the siren and flashes the parking lights. The |
| text and | |
PANIC | |||
siren tones play to confirm. Press the | or | button to stop | |
the output. |
|
|
|
Disarm
Press and release
The alarm disarms, doors unlock (if connected), and the siren chirps and parking lights flash twice. The DISARM text and beeps play to confirm and the system status icons update. If Valet mode* is On, the doors unlock and the VALET text and tone play.
More than 2 siren chirps and remote beeps indicate a trigger has oc- curred. The DISARM text is replaced by the Alarm report.**
14 | © 2011 Directed Electronics. All rights reserved. |
