Classe Audio CDT-300 owner manual AC Mains Power Switch

Page 17

Danger!

Caution:

8AC Mains Power Switch

The main power switch for the CDT-300 is located at the right side of the rear panel. The transport should be in standby mode before being switched off. Switching the unit on puts it in standby mode.

Potentially dangerous voltages and current capabilities exist within your DVD transport, even when disconnected from AC mains. Do not attempt to open any portion of the transport’s cabinet. There are no user- serviceable parts inside your DVD transport. All service of this product must be referred to a qualified authorized Classé dealer or distributor.

9AC Mains Input

An IEC standard power cord (supplied) is used with the CDT-300. Plug the cord into the IEC outlet provided, and the other end into a suitable wall outlet.

The AC inlet assembly includes a built-in fuse for the protection of the unit in case of major AC mains problems and/or component failure.

If your CDT-300 ever behaves as though it were not connected to the AC mains (meaning it seems completely dead), remove the AC cord from the unit and open the fuse holder immediately above the AC cord inlet. If the fuse is blown, replace it with the spare fuse contained in the fuse holder. If the spare fuse blows, take the unit to your qualified Classé dealer immediately.

There are no user-serviceable parts inside the CDT-300. Do not attempt to diagnose the problem yourself.

17

Image 17
Contents CDT-300 DVD Transport Page Important Safety Instructions Contents Brightness Timeout Language Colors Temporary display Welcome to the Classé family Word about installationUnpacking and Placement Register your purchase Operating voltage Warm up/break-in period Please read this manual… Extensive listening tests Extraordinary longevity Special Design FeaturesFlexible GUI Front Panel Standby button & LED indicatorLCD touchscreen Menu buttonEject button IR windowAnalog Video Outputs Rear PanelDigital Outputs Hdmi Digital Video OutputIR Input and Output RS-232 Control Port DC Trigger Input and OutputClassé CAN-Bus Control Ports AC Mains Power Switch Basic Functions Remote ControlNumeric Keypad, Programming & Volume Navigation Keys System Controls Transport ControlsPlaylist Using the CDT-300CD operational menu Controls menu Repeat mode Shuffle Time display Program Home screen Controls DVD operational menuMain menu system System setupMenu System Teach IR Display setup Triggers This button brings up the remote Fkeys menu Remote FkeysCAN-Bus FeaturesStatus Version info Sensors Classé Delta Series Products Hardware setupCategory 5 Network Cables CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface BoxUsing CAN-Bus Configuration Operate AC status Status Name CAN-Bus shared featuresPlayLink Global brightness Global standbyAmp info Event log Brightness Timeout Display setup menuLanguage Colors Temporary display Audio setup System SetupAudio delay Digital output Video standard Video setupAspect ratio Resolution Edge enhancement Audio format Audio language Subtitle language CD autoplay Color spacePreference Parental control NavigationUpdating Your Unit There is no sound and the Standby LED is not lit TroubleshootingMy disc is skipping IR remote control seems not to function Care & Maintenance Specifications Dimensions Page North America 1 800 370 3740 email classe@bwgroupusa.com