Classe Audio CDT-300 CAN-Bus shared features, Configuration Operate AC status Status Name

Page 30

CAN-Bus shared features

configuration

operate

AC status

status

name

30

The touchscreen will then display the CAN-Bus devices screen, which lists connected Delta series components by model & serial number.

Highlighting a unit on the CAN-Bus devices screen identifies it as the target unit. The front panel LEDs of the target unit will start flashing (unless you highlight the unit that you are using to access CAN-Bus).

Once you have chosen the target unit press select. The target unit’s LEDs will stop flashing and the touch screen will list the CAN-Bus features available to it. Some CAN-Bus features are shared by all models, some are specific to individual models.

The following CAN-Bus features are shared by all models.

Selecting configuration will present the CAN-Bus configuration screen allowing access to name, global brightness, and global standby features.

The operate settings allow you to bring the target unit in and out of standby, or mute. This key will be disabled for the unit whose touchscreen you are using to access CAN-Bus.

The AC status screen displays information from the target unit’s electrical supply sensors. Two screens are available, with the second accessed by selecting more.

The status screen is the simplest way to access essential information about the target unit. It displays the target unit’s model number, software version, operational status and serial number.

Allows you to set the name that this component will be listed under in the CAN-Bus devices screen. The name will appear next to the unit model and serial number, and facilitate the identification of units in large systems.

Image 30
Contents CDT-300 DVD Transport Page Important Safety Instructions Contents Brightness Timeout Language Colors Temporary display Word about installation Welcome to the Classé familyUnpacking and Placement Register your purchase Operating voltage Warm up/break-in period Please read this manual… Special Design Features Flexible GUIExtensive listening tests Extraordinary longevity Standby button & LED indicator Front PanelEject button Menu buttonLCD touchscreen IR windowRear Panel Analog Video OutputsHdmi Digital Video Output Digital OutputsIR Input and Output DC Trigger Input and Output Classé CAN-Bus Control PortsRS-232 Control Port AC Mains Power Switch Remote Control Numeric Keypad, Programming & VolumeBasic Functions Navigation Keys Transport Controls System ControlsUsing the CDT-300 CD operational menuPlaylist Controls menu Repeat mode Shuffle Time display Program DVD operational menu Home screen ControlsSystem setup Menu SystemMain menu system Teach IR Display setup Triggers Remote Fkeys This button brings up the remote Fkeys menuFeatures Status Version info SensorsCAN-Bus Category 5 Network Cables Hardware setupClassé Delta Series Products CAN-Bus Terminator SSP-300 & 600 CAN-Bus Interface BoxUsing CAN-Bus CAN-Bus shared features Configuration Operate AC status Status NameGlobal brightness Global standby PlayLinkAmp info Event log Display setup menu Brightness TimeoutLanguage Colors Temporary display System Setup Audio setupAudio delay Digital output Video setup Video standardAspect ratio Resolution Edge enhancement Color space PreferenceAudio format Audio language Subtitle language CD autoplay Navigation Parental controlUpdating Your Unit Troubleshooting My disc is skippingThere is no sound and the Standby LED is not lit IR remote control seems not to function Care & Maintenance Specifications Dimensions Page North America 1 800 370 3740 email classe@bwgroupusa.com