unpacking your unit
Important!
placement
ventilation
custom installations
serial number
Unpacking and Placement
Carefully unpack your DVD transport according to the supplied instructions, and remove all accessories from the carton.
Keep all packing materials for future transport of your Classé product. Shipping your new component in anything other than its
The
As with any digital component, it is best to place the
Note that adequate clearance for the AC cord and connecting cables must be left behind the
Classé recommends that the unit not be placed directly on the top surface of a power amplifier (or any other heat source).
Your Classé DVD transport generates a certain amount of heat in the course of normal operation. Be sure to allow three inches (75mm) of clearance above it and three inches (75mm) to each side to allow heat dissipation through air circulation. Avoid placement on soft surfaces that would restrict airflow (such as plush carpeting).
Drawings are included in this manual to facilitate special installations and custom cabinetry (see the section Dimensions). An optional,
The serial number for your DVD transport is found on the rear of the unit. Please note and record this number on the page entitled Important Safety Instructions for your future reference.
7