e.Are all cable connections to the control module (in the junction box) in place per the instructions? Are the connectors fully engaged?
f.Are any of the connectors damaged?
g.Are the wires within the connectors attached to the pins? Each wire may have to be tugged lightly to check if the wire is still crimped to the pin.
4.POST-INSPECTION:
a.If improper or loose connections are found, reconnect them firmly (unless a loose wire has been found). Plug the power supply AC cord into a live wall socket and operate the unit through all functions.
b.If the switch seat symbol is rotated or there is evidence of damage to the box and cable notify
c.If damage to any other electrical cable or component, or disconnected wires are found, please notify
5.ACTIONS:
a.If full operation is restored, please advise
b.If the fault cannot be corrected by simple
If you have any questions about the setup and / or operation of the Heat and Massage Unit, please call the
18 |