Stanley Black & Decker EPX10 user manual Replacing the Battery

Page 25

REPLACING THE BATTERY

9.Remove the batteries negative cable from the current shunt.

10.Pull out the cable.

11.Pull out the black cables connector form the top socket (TEMP1) and the blue cables connector form the bottom socket (TEMP3).

12.Remove the two connecters on the charger outlet, that aren’t soldered.

EPX10 User Manual ◄ 25

Image 25

Contents EPX10 Weisbeck, Andy Declaration of ConformityTable of Contents Local Safety Regulations Safety SymbolsSafety Precautions LED Charging the BatteryPreoperation Initial Setup and Battery ChargingOperation On / OFF PIN BrazeSetting Right Lift Height SpecificationsEquipment PIN HoldersBattery Indicator MaintenanceLifting Height Control Periodic maintenance of S15 automatic gun Lift level tool Advanced maintenance work Adjusting the liftlevel Nothing Happens When YOU Press Buttons TroubleshootingBrazing Never Stops Brazing Pins & Ceramic Rings Standard Brazing Pins AccessoriesCeramic Rings PIN & Ring HoldersType C ConnectorsType D Grinder Grinder AbrasivesGuns CablesEPX10 Parts Illustration Higher only EPX10 Parts List Fuse 5AT EPX10 Electrical DiagramReplacing the Battery Replacing the Battery Replacing the Battery Replacing the Battery Replacing the Battery