Fisher-Price L3891 manual Storage, To remove the pad

Page 16

Storage

Care

Pull Frame

Release Latch

14

With the legs all the way open, lower the seat to position 7 the lowest position).

Pull the frame release latches forward and push the rear legs toward the front legs.

The pad, frame, and base tray may be wiped clean using a mild cleaning solution and a damp cloth. Do not

use bleach.

The restraint system may be wiped clean or is machine washable. Machine wash in cold water on the gentle cycle. Do not use bleach. Line dry.

The food tray, teether toy and restraint system are also top rack dishwasher safe (or use bottom rack - without using the drying cycle).

To remove the pad:

Remove the elastic loops from the pegs on the underside and back of the seat.

From behind the product, squeeze the restraint release tabs and remove the restraint system from the peg.

From the front of the product, pull to remove the restraint system.

Unfasten the pad hooks from the front edge of the seat. Lift the top of the pad off of the seat back.

To replace the pad, refer to Assembly steps 14-20.

IMPORTANT! Never use this product without the restraint system. Replace the waist/shoulder belts and crotch belt.

©2006 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.

PRINTED IN CHINA

Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.

L3891pr-0729

Image 16
Contents L3891 Consumer Information Prevent serious injury or death from falls or sliding outParts Assembly Insert Screws Here Hinge Hinge Rod Hints Press Press Shoulder Straps Crotch Strap Clips Smaller Baby Larger BabyTo loosen the shoulder straps Lift the adjuster C Secure ChildTo change strap slots Using the Trays Using the Brakes Always leave wheels lockedTo adjust the seat height Adjusting the SeatTo adjust the seat angle Storage To remove the pad