Fisher-Price L3891 manual Press Press

Page 7

Assembly

Screw Retainers

Front Base

11

Fit the frame front legs onto the front base.

Fit a screw retainer over the hole in a front leg.

Insert a #10 x 2,2 cm black screw through the screw retainer and front leg.Tighten the screw.

Repeat this procedure to fasten the other end of the front base with the remaining screw retainer and

#10 x 2,2 cm black screw.

Hint: The #10 x 2,2 cm black screws may have been assembled to the screw retainers.

Seat Height Adjusters

13

Seat Bottom Tube Ends

 

From the back and bottom of the assembly, insert a #8 x 1,9 cm screw through both seat height adjusters and the ends of the seat bottom tube. Tighten the screws. This may require extra force.

PRESS PRESS

Push

Push

 

14

 

•Squeeze the restraint release tabs together.

 

•Remove the ends of the restraint system from the peg.

12

 

•Push each seat height adjuster to be sure they are

 

completely on the seat bottom tubes.

 

•Insert a #8 x 1,9 cm screw through each seat height

 

adjuster and the ends of the seat bottom tube. Tighten

 

the screws. This may require extra force.

 

Image 7
Contents L3891 Prevent serious injury or death from falls or sliding out Consumer InformationParts Assembly Insert Screws Here Hinge Hinge Rod Hints Press Press Shoulder Straps Crotch Strap Clips Larger Baby Smaller BabySecure Child To loosen the shoulder straps Lift the adjuster CTo change strap slots Using the Trays Always leave wheels locked Using the BrakesTo adjust the seat height Adjusting the SeatTo adjust the seat angle To remove the pad Storage