Assembly
Insert Screws Here
Hinge
Hinge Rod
4
•Insert two #10 x 2,2 cm black screws through the footrest and into the seat bottom.Tighten the screws.
Seat Back Pins
Slot | Slot |
6
•Turn the seat assembly face down.
•Insert the hinge rod through the hinge on the seat back and seat bottom, as shown.
•Insert a #10 x 2,2 cm black screw into the hinge rod. Tighten the screw.
•Set the seat assembly aside for Assembly step 10.
Frame Leg
5
•Turn the seat bottom assembly upright.
•Fit the seat back pins into the slots in the top side of the seat bottom assembly.
7
•Pull the frame leg out on each frame to open. Make sure it "clicks" into place.