Storage | Care |
Pull Frame
Release Latch
13
•With the legs all the way open, lower the seat to position 7 the lowest position).
•Pull the frame release latches forward and push the rear legs toward the front legs.
•The pad, frame and base tray may be wiped clean using a mild cleaning solution and a damp cloth.
•The restraint system may be wiped clean or is machine washable. Machine wash in cold water on the gentle cycle. Do not use bleach. Line dry.
•The food tray, teether toy and restraint system are also top rack dishwasher safe (or use bottom rack - without using the drying cycle).
To remove the pad:
•Remove the elastic loops from the pegs on the back of the seat.
•From behind the product, squeeze the restraint release tabs and remove the restraint system from the peg.
•From the front of the product, pull to remove the restraint system.
•Unfasten the pad hooks from the front edge of the seat. Lift the top of the pad off of the seat back.
•To replace the pad: refer to Assembly steps
IMPORTANT! Never use this product without the restraint system. Replace the waist/shoulder belts and crotch belt.
©2010 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. | |
PRINTED IN MEXICO |