Fisher-Price L0542 manual Push

Page 7

Assembly

Screw Retainers

Base

10

Insert the frame front legs onto the remaining base.

Fit a screw retainer over a hole in the front leg.

Insert a #10 x 2,2 cm black screw through the screw retainer and front leg. Tighten the screw.

Repeat this procedure to secure the other end of the base with the remaining screw retainer and #10 x 2,2 cm black screw.

Hint: The #10 x 2,2 cm black screws may have been assembled to the screw retainers.

PUSH

PUSH

Seat Bottom Tube Ends

11

Push each seat height adjuster to be sure they are completely on the seat bottom tubes.

Insert a #8 x 1,9 cm screw through each seat height adjuster and the ends of the seat bottom tube. Tighten the screws. This may require extra force.

7

Image 7
Contents L0542 Prevent serious injury or death from falls or sliding out Consumer InformationAssembled Parts Assembly Insert Screws Here Hinge Hinge Rod Hints Push Press Press Shoulder Straps Up Clips Lowest Slot Crotch Strap Down Larger Baby Smaller BabyTo loosen the waist straps ABCNote Secure ChildTo change strap slots Using the Trays Using the Teether Toy To adjust the seat height Adjusting the SeatTo adjust the seat angle To remove the pad Storage