Assembly
Seat Height Adjusters
#8 x 1.9 cm Screw - 2
| Seat Bottom Tube Ends |
14 |
|
Back and Bottom View |
•From the back and bottom of the assembly, insert a #8 x 1.9 cm screw through both seat height adjusters and the ends of the seat bottom tube. Tighten the screws.
Pad
Elastic Loops
Hole 
Hole
Front View
Tabs
Elastic Loops
15 | Back and Bottom View |
•Lift the assembly upright.
•From the front of the assembly, place the pad onto the seat.
•Lift the bottom of the pad. Insert the two elastic loops on the pad through the holes in the seat bottom.
•From the back and bottom of the seat, hook the elastic loops to the tabs on the seat.
8