Inside the U.S. and Canada, Service issues

Specifications

Warranty and Service

Quick Start Guide

Output:
Power (regenerated)	-	500 Watts
(filtered)	-	1800 Watts
Voltage	-	95 - 250 Volts
		(depending on model)
Frequency	-	50 - 120 Hz
Current	-	7 Amps
Peak	-	10 Amps (soft limit)
Distortion (THD)	-	0.1%
Input:
AC input range	-	90-250 Volts
		(depending on model)
Frequency input	-	50/60 Hz
Input capacity	-	750 VA
Power consumption	-	35 Watts
		(with no load)
General
Width	-	17.25 in
Height	-	4.25 in
Depth	-	13 in
Weight	-	33 lbs
Cooling system	-	forced
		convection

Inside the U.S. and Canada

PS Audio’s warranty is 3 years parts and labor, from the date of original purchase. The warranty follows the product itself regardless of ownership, new or used.

Outside the U.S. and Canada

PS Audio has authorized distribution in many countries of the world. In each country, the authorized importing retailer or distributor has accepted the responsibility for warranty of products sold by that retailer or distributor. Warranty service should normally be obtained from the importing retailer or distributor from whom you purchased the product. In the unlikely event of service required beyond the capability of the importer, PS Audio will fulfill the conditions of the warranty. Such product must be returned at the owner’s expense to the PS Audio factory. Contact your PS Audio distributor or the PS Audio customer service department for more information.

Service issues

Should your unit ever require service or if you have any technical questions about the P500, you must either contact your dealer (PS Audio if purchased direct) or your PS Audio distributor. No equipment will be received at our service facilities without an attached RA number.

If the product was purchased through an authorized PS Audio dealer or distributor, the RA number must be obtained by the dealer or distributor. If the product was purchased from PS Audio direct, the RA number can be easily obtained by contacting PS Audio by phone at 720-406-8946 or by e-mail at <service@psaudio.com>

•Up to 500 watts power delivery - depending on load requirements.*

•Next generation MultiWave II technology featuring AutoWave and TubeWave.

•Independent power zones keep power for analog, digital and high current equipment electrically isolated.

•Regenerated AC delivered through 4 Power Port outlets.

•Filtered AC by High Current Ultimate Outlet™ delivered through 2 Power Port outlets.

•Front panel display for systems monitoring and user interface.

•Front panel displays waveform setting, output voltage, wattage and percentage of maximum power output.

•Massive heat sink with thermally controlled cooling fan.

•Reduction of AC line noise by more than 70dB.

•High voltage surge suppression devices for surge and spike protection.

•Lower AC impedance for better transients.

•Massive toroidal transformer for extended headroom.

•PS Audio’s brushed aluminum FRAME chassis.

•Optional rack mount capability.

•PS Bus for communication with other PS Audio devices.

* Note about power consumption:

The P500 is capable of delivering up to 500 watts into a reactive load and up to 350 watts into a resistive load. Examples of a reactive load are: most solid state equipment and video products. An example of a resistive load is: tube based equipment.

1.Place the P500 in a rack or on a shelf in the audio/video system. If placed on carpet it is necessary to use isolation or accessory feet to elevate it above the carpet 1 inch. Ensure there are no objects within 6 inches of the rear of the unit as it is necessary for proper ventilation. Failure to do so could compromise the power regeneration capabilities of the P500.

2.Connect audio/video equipment to the P500. There are three electrically isolated duplex receptacles on the P500, which are oriented vertically.

For optimum performance, we recommend that equipment with low wattage power requirements be plugged into the "Regenerated AC" receptacles (2-ch preamps, AV processors, DVD/CD players, Satellite receivers, PVR’s, D to A converters, low power solid state amplifiers, etc).

Equipment with high wattage power requirements should be plugged into the "Filtered AC" receptacles (direct view TVs, plasma or projection displays, multi channel, tube or high powered amplifiers).

3.Plug the P500 into a power source such as a wall AC outlet. Use the supplied AC power cable, or an aftermarket power cable. We would strongly urge the use of an xStream Power Cable.

4.Turn on the P500 by pressing the power button located on the far left side of the front panel. The Regenerated AC zone will become active. The Filtered AC zone becomes active when the P500 is plugged into a live outlet.

5.If desired, select a MultiWave II setting or allow AutoWave to adapt to the power needs of your system using the front panel controls.

Default settings

The P500 comes from the factory with standard default settings that should work well for most situations. The type of power delivery can be configured to achieve the optimal performance for any system.

P500 specifications

The PS Audio P500 is an innovative power plant that stands out in the high-fidelity audio community. This device is designed to enhance the performance of audio components by providing clean, stable, and isolated power. The P500 combines a range of advanced technologies and features that cater to audiophiles seeking to elevate their listening experiences.

One of the primary characteristics of the P500 is its ability to regenerate AC power. Traditional power conditioners merely filter and clean incoming electricity, whereas the P500 goes a step further by creating pure sine wave power from DC. This regeneration process helps to eliminate noise and distortion, ensuring that audio components receive electricity that is both stable and untainted.

The P500 features multiple outlets, allowing users to connect several audio components simultaneously. Each outlet generates electricity that maintains the same high quality, meaning that all connected devices benefit from the P500's advanced technology. This is particularly advantageous for high-end systems with numerous components, as it aids in maintaining optimal performance across the entire audio chain.

Another standout feature of the P500 is its LCD display, which provides vital information about power output and draw. It allows users to monitor the performance of their audio system in real time, enabling them to optimize their setup for the best possible sound quality. This level of monitoring is crucial for audiophiles who take their listening seriously and want to ensure that every detail is perfectly rendered.

Additionally, the P500 includes a built-in isolation transformer, which further protects audio equipment from external electrical interference. This isolation is essential in minimizing the impact of power supply pollution, which can compromise sound quality. With the P500, users can rest assured that their audio components are getting the cleanest power possible.

The design of the P500 also deserves mention. It is built with high-quality materials, featuring a robust chassis that not only looks great but also reduces vibrations that can affect performance. This attention to detail in both engineering and aesthetics makes the P500 a desirable component for any serious audio enthusiast.

In summary, the PS Audio P500 is a powerful tool for audiophiles looking to enhance their systems with superior power management. With features like AC regeneration, multiple high-quality outputs, real-time monitoring, isolation transformers, and a well-built design, the P500 provides an unparalleled listening experience that transforms how music is enjoyed. As a result, it has become a staple among those who demand the very best in audio fidelity.