D-Link DFL-200 manual Add Read-only access to an interface, Enable Snmp access to an interface

Add Read-only access to an interface

To add read-only access click on the interface you would like to add it to, note that if you only have read-only access enable on an interface all users only get read-only access, even if they are administrators.

Follow these steps to add read-only access to an interface.

Step 1. Click on the interface you would like to add it to.

Step 2. Enable the Read-onlycheckbox.

Step 3. Specify what networks are allowed to ping the interface, for example 192.168.1.0/24 for a whole network or 172.16.0.1 – 172.16.0.10 for a range.

Step 4. Specify protocol used to access the DFL-200 from the dropdown menu, either HTTP and HTTPS (Secure HTTP) or only HTTPS.

Click the Apply button below to apply the setting or click Cancel to discard changes.

Example:

Enable SNMP access to an interface

Follow these steps to add read-only SNMP access to an interface.

Step 1. Click on the interface you would like to add it to.

Step 2. Enable the Read-onlycheckbox.

Step 3. Specify what networks are allowed to ping the interface, for example 192.168.1.0/24 for a whole network or 172.16.0.1 – 172.16.0.10 for a range.

Step 4. Specify the community string used to authenticate against the DFL-200.

Click the Apply button below to apply the setting or click Cancel to discard changes.

Example:

14