Assembly
5 | Pedal Hub |
Pedal Axle
Slot
Metal Tab
Metal Tab
Pedal Hub
9
Pedal Hubs
•Place two pedal hubs on the pedal axle so that the metal tabs on the pedal axle fit into the slots inside each pedal hub.
•Push the pedal hubs in until they are flush with the surface of the front wheel.
6
Pedal Hubs
Pedal Axle
Front Wheel
Rectangular Hole
•While holding the pedal hubs on the pedal axle, insert the assembly into the rectangular hole in the front wheel.
7
Pedal Hubs
10 | Lock Washer |
|
Raised Tabs
Pedal Slot
Closed End
•Insert a lock washer into the pedal slot. Make sure the raised tabs on the lock washer are facing the closed or outside end of the pedal.
•Insert the other lock washer into the other pedal.
11
Lock Washer
(Inside Pedal)
•Push the pedal hubs in until they are flush with the surface of the front wheel.
8 | Pedal Hub |
|
Pedal Axle
Pedal Hub
•Turn the front wheel assembly over.
•Insert a pedal hub on top of the pedal axle and into the rectangular hole in the front wheel.
•Insert the remaining pedal hub below the pedal axle and
into the rectangular hole in the front wheel.
Pedal
Pedal Axle
•Place a scrap block of wood under the front wheel assembly.
•Fit a pedal on the pedal axle.
•With the lock washer centered over the pedal axle end, tap the pedal with a hammer until it is secure.
•Repeat this procedure to attach the other pedal to the other
5end of the pedal axle.