Swing Mode, Swing and Music, Seat Mode | Fisher-Price T2065 instruction

Swinging Motion, Soothing Sounds and Calming Vibrations

Main Power Switch

Swing Speed/Power Switch

Music/Volume Switch

Swing Mode

• Place your child in the seat and secure properly.

Hint: You can turn the toy bar back when placing baby in the seat.

•Slide the main power switch ON. The power L.E.D. turns ON .

•Slide the swing speed/power switch ON .

•Give the seat a light push to start the swinging motion.

•Adjust the swing speed/power switch to the desired swing motion setting.

Hints:

-After turning on power, this product may not swing unless there is a child in the seat.

-As with most battery-power swings, a heavier child will reduce the amount of swinging motion on all settings. In most cases, the low setting works best for a smaller child while the higher setting works best for a heavier child.

-If the low setting provides too much swinging motion for your child, try placing one end of a blanket underneath your child and let the other end of the blanket drape down while swinging.

-If swinging stops while using a lower setting, try a higher setting. Give the seat a light push to start the swinging motion again.

-Vibrations will not work in swing mode. To use calming vibrations, follow the instructions in the previous section to convert the product to seat mode.

•To turn off swinging, slide the swing speed/power switch off .

Music

•Slide the music/volume switch to ON with low volume , ON with high volume or OFF .

Swing and Music

•To turn off swinging and music, slide the main power switch OFF . The power L.E.D. turns OFF.

Seat Mode

•Place your child in the seat and secure properly.

•Slide the vibration switch ON or OFF .