Swing, Waterglobe and Mobile Use
Adjust Swing Motions | Using the Tray | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRESS
Seat Tube Button
Seat Tube | Tray |
|
TURN
6
Slot
• Fit the tabs on the tray into the slots in the sides of the seat.
• To remove the tray, pull one edge of the tray out and lift.
Storage
4 | Swing |
Cradle |
You can adjust the motion of the swing: side to side or front to back.
•Press the seat tube button to unlock the seat tube.
•Rotate the seat tube to the desired position.
Adjust Seat to Recline or Upright
Button
Button
Lower Leg
Button
Lower Leg
Button
Upright |
7
Recline
5 | Front Edge | |
of Seat | ||
| ||
| Press Seat Position Buttons |
You can adjust the seat to two different positions: Recline or Upright.
•From behind the seat, press both seat position buttons.
•Push the seatback up until the buttons “snap” into the upright position.
•Push the seatback down until the buttons “snap” into the
recline position. | 10 |
•Press the buttons on the back of the motorized frame while pushing the legs inward.
•Lean the swing frame against a wall for storage. IMPORTANT! Remove the batteries for
Hint: The legs may be disassembled for