Fisher-Price 79667 instruction sheet Make sure the rounded side of the lock nut faces out

Page 7
M5 Lock Nut
BOTH SHOWN ACTUAL SIZE

Assembly

M5 x 30 mm Bolt

Rounded

Side

M5 Lock Nut

BOTH SHOWN ACTUAL SIZE

13

Fit an M5 lock nut into the recess in the seat tube.

Make sure the rounded side of the lock nut faces out.

Insert an M5 x 30 mm screw into the opposite side of the seat tube.

Tighten the screw with a Phillips screwdriver. Do not over-tighten.

15

M5 x 30 mm Screw

Rounded

Side

• Fit an M5 lock nut into the recess in the motorized frame tube.

Make sure the rounded

side of the lock nut faces out.

Insert an M5 x 30 mm screw into the smaller hole in the motorized frame tube.

Tighten the screw with a Phillips screwdriver. Do not over-tighten.

Motorized

Frame Tube

Hole

Press

Seat Tube

Button

14

Press the button on the seat tube and slide the seat tube into the motorized frame tube. Make sure the button on the seat tube “snaps” into the larger hole in the motorized frame tube.

Mobile

Clip

Toy

Clip

Slot

16

• Fit the string (below the knot) of a toy through the slot in a clip on the mobile.

• Pull down on the toy to be sure it is secure on the mobile.

• Repeat this procedure to assemble the other three toys to

7

the mobile.

Image 7
Contents Model Number Aquarium Cradle SwingConsumer Information One 1 Year Limited WarrantyParts Shown Actual Size AssemblyAttached Insert the tray tabs into the slots in each side of the seat Make sure the rounded side of the lock nut faces out 5V x LR20 SafetyTo tighten the waist belts Swing, Waterglobe and Mobile UseTo loosen the waist belts Adjust Swing Motions Using the Tray Waterglobe, Mobile, Music and Sounds To select waterglobe/mobile, slide switch toTo select sounds or music, slide switch to SwingCare Problems and Solutions
Related manuals
Manual 2 pages 43.1 Kb