3M 7685-S-8 manual Install Lug or Connector

Page 17

14.0Install Lug or Connector

14.1Check to insure 3M™ Cold Shrink QT-III Silicone Rubber Termination assembly fits over the selected lug or

connector. If lug or connector (Figure 23) will not fit through the termination core, clean the insulation (per Step 15.0) and slide termination on cable before installing lug or connector. DO NOT REMOVE CORE AT

THIS TIME.

Clearance

Connector/Lug

Figure 23

NOTE: Refer to pages 19 - 21 for 3M™ connector and lug crimping information.

NOTE: For Aluminum Conductors - Thoroughly wire brush conductor strands to remove aluminum oxide layer. Immediately insert conductor into lug or connector barrel as far as it will go.

14.2Position connector or lug and crimp according to manufacturer's directions. Remove excess oxide inhibitor and sharp crimp flashings following crimping.

15.0Clean Cable Insulation and Lug or Connector Barrel Using Standard Practice

15.1Wipe the cable insulation with one of the solvent saturated pads from the 3M™ Cable Cleaning Preparation Kit

CC-2.DO NOT ALLOW SOLVENT TO TOUCH SEMI-CON INSULATION SHIELD!

15.2If abrasive must be used:

a.Use on insulation only. DO NOT USE ABRASIVE ON SEMI-CON INSULATION SHIELD!

b.Use only aluminum oxide abrasive; grit 120 or finer, included in the 3M™ Cable Cleaning Preparation Kit CC-2.

c.Be careful not to reduce the cable insulation diameter below that allowed by the kit.

78-8119-6018-2 Rev C

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 7685-S-8 Instructions With High-K Stress ReliefKit Contents Prepare Cable Instructions For Tape Shielded CableInstall Ground Braid Special Note for Cloth or Paper SEMI-CON Insulation Shield Do not Remove Core AT this Time Install Lug or ConnectorVinyl Tape Marker Install TerminationBe Sure to Allow for Depth of Terminal LUG Instructions for Wire Shielded Cable6 mm Constant Force Spring Trim Shield Wires Figur e This TimeCounter-Clockwise To Allow for Depth of Terminal LUG Instructions for UniShield Shielded CableRemove semi-conductive jacket to dimension shown in Figure Shield Wire ND Scotch Mastic Strip Install Lug or Connector Vinyl Tape Marker Ridge at End of Cable Thru 30045 One hole Tooling IndexThru 40079 One hole Thru 40178 Two hole Conductor Size AWG & kcmil Stranded Important Notice

7685-S-8 specifications

3M 7685-S-8 is a highly regarded product developed by 3M, a global leader in science and innovation. This item forms part of 3M's extensive range of adhesive materials, known for their performance and versatility in various applications. Tailored specifically for industrial uses, the 7685-S-8 is recognized for its robust characteristics, making it an ideal choice across numerous industries.

One of the main features of 3M 7685-S-8 is its advanced adhesion technology. This product employs a high-performance acrylic adhesive that provides exceptional bond strength. It adheres well to a wide variety of surfaces, including metals, plastics, and glass, ensuring a strong and durable bond that stands the test of time. The adhesive is formulated to resist degradation under various environmental conditions, including humidity, temperature fluctuations, and UV exposure. This resilience makes it suitable for both indoor and outdoor applications.

Another notable highlight of the 7685-S-8 is its ease of use. The product is available in a convenient format, allowing for straightforward application. It features a backing material that aids in the accurate placement of the adhesive, contributing to reduced waste and improved efficiency during the application process. Moreover, the user-friendly design minimizes the risk of human error, ensuring consistent quality results across projects.

In addition to its adhesive capabilities, the 3M 7685-S-8 showcases compatibility with various technologies commonly used in industrial settings. Whether one is utilizing automation processes or manual techniques, this product seamlessly integrates into existing workflows, enhancing operational efficiency. The acetate liner makes for easy handling and simplifies the cutting and shaping processes, accommodating different sizes and shapes as required by the user’s specifications.

3M 7685-S-8 is also characterized by its ability to provide a clean appearance once installed. The transparency of the adhesive allows for discreet bonding, maintaining the aesthetic integrity of the final product. Furthermore, its reliable performance and durability reduce the need for frequent replacements, ultimately leading to cost savings over time.

In conclusion, 3M 7685-S-8 exemplifies the cutting-edge technologies and user-friendly features characteristic of 3M products. Its high-performance adhesion, environment-resistant properties, ease of application, and versatility across various materials make it an indispensable tool for professionals in the industry, ensuring that projects not only meet but exceed expectations.
Top Page Image Contents