Multiquip MGX manual Components, 220V depending on model. Make sure to check voltage, Power source

Page 14

components

1

8

7

3

6

4

5

1.ON/OFF Switch — Turns power on when pressed and off when released.

	2. Power Cord — Connects to the power source. (120V or
	220V depending on model). Make sure to check voltage
	on motor nameplate and connect to the appropriate
2	power source.

3.Motor — 120V or 240V depending on model.

4.Flexible Shaft — Transmits rotary motion from the motor to the head.

5.Vibrator Head — Generates vibration via an eccentric rotator that consolidates the concrete by removing air pockets.

6.Coupler — Attaches the shaft/head assembly to the motor.

7.Air Intake —Air comes in and suctioned by the fan to cool the motor, then discharged at the rear of the motor.

8.Power Lock Button — Locks the ON/OFF Switch to the ON position. Lock is released when the ON/OFF Switch is pressed again.

Figure 4. MGX Vibrator Components

page 14 — MGX Series • operation and parts manual — rev. #0 (03/26/12)

Image 14

Contents Model MGX Series 2 MGX Series operation and parts manual rev. #0 03/26/12 Silicosis/Respiratory Warnings Silicosis WarningTable of Contents MGX Series Concrete Vibrator Choose from three easy options PerSonal SaFeTy Safety InformationSaFeTy MeSSageS  Stay alert, watch what you are doingMoTor and FleXSHaFT SaFeTy General poWer Tool SaFeTy WarningSWorK area SaFeTy  Keep the cord from heat, oil, and sharp objectsEleCTriCal SaFeTy  Use only factory-authorized replacement partsServiCe Power Cord/Cable SafetyPoWer Tool uSe and Care EnvironMenTal SaFeTy/deCoMMiSSioningSpecifications Vibrator SpecificationsDimensions DimensionsConsolidation Why vibrate concreteGeneral information Vibration timeExample Head Selection220V depending on model. Make sure to check voltage Power sourceComponents On motor nameplate and connect to the appropriateOperation Connect the vibrator to the proper power sourceOperation Drive Motor inspection MaintenanceCarbon brush replacement Vibrator head lubrication 300 HoursShaft lubrication 200 Hours Vibrator head wear 300 HoursSlowly pull the wire core from the shaft Removing Shaft from MotorTroubleshooting Fill head casing to recommended levelExplanation of Code in Remarks Column Suggested Spare Parts Qty DescriptionMotor assy 042506000 002240530247458630 247010102Shaft/Head assy 242913010 242913040MGX12325/MGX22325 MGX12810/MGX2281026 MGX Series operation and parts manual rev. #0 03/26/12 242953020 242953040242953010 242953030Terms and Conditions of Sale Parts FreigHT poliCyMgx Series operation and parts manual rev. #0 03/26/12 HERE’S HOW to GET Help