Stow MSD0H operation manual MS20H/MS20E Mixer -TRAILER Safety Guidelines

MS20H/MS20E MIXER —TRAILER SAFETY GUIDELINES

Lug Nut Torque Requirements

It is extremely important to apply and maintain proper wheel mounting torque on the trailer. Be sure to use only the fasteners matched to the cone angle of the wheel. Proper procedure for attachment of the wheels is as follows:

1.Start all wheel lug nuts by hand.

2.Torque all lug nuts in sequence. See Figure 8. DO NOT torquethewheellugnutsallthewaydown.Tighteneachlug nut in 3 separate passes as defined by Table 6.

Table 6. Tire Torque Requirements

Wheel Size	First Pass	Second Pass	Third Pass
	FT-LBS	FT-LBS	FT-LBS
12"	20-25	35-40	50-65
13"	20-25	35-40	50-65
14"	20-25	50-60	90-120
15"	20-25	50-60	90-120
16"	20-25	50-60	90-120

3.Afterfirstroaduse,retorquealllugnutsinsequence.Check all wheel lug nuts periodically.

NOTE

NEVER! use an pneumatic air gun to tighten wheel

lug nuts. Figure 8. Wheel Lug Nuts Tightening Sequence

MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV. #3 (08/10/06) — PAGE 21