Oricom SECURE 200 manual Feed Time Setting, Set the time, Set the hour format

Page 19

Set the time

2.Press [ OK ] key and "Set time" is shown on the display. Press [ OK ] key.

3."Year" is shown on the display. Use [ / ] keys to select the correct year. Press [ OK ] key.

4."Month" is shown on the display. Use [ / ] keys to select the correct month. Press [ OK ] key.

5."Day" is shown on the display. Use [ / ] keys to select the correct day. Press [ OK ] key.

6."Hour" is shown on the display. Use [ / ] keys to select the correct hour using the 24 hour clock. Press [ OK ] key.

7."Minute" is shown on the display. Use [ / ] keys to select the correct minute. Press [OK] key and "Saved" is shown on the display.

Set the hour format

Use [ / ] keys to select "Hour Format", press [ OK ] key, "12Hrs?" or "24Hrs?" is shown on the display, press [ OK ] key to select 12 hours or 24 hours clock format.

Time displayed in the 12 hour clock format will include a small "a" to denote AM and a small "p" for PM.

Feed Time Setting

Menu Settings 17

baby's feeds are due. You have the choice to either set an alert just for your baby's next feed time, or for your baby's next feed time plus subsequent feeds based on the interval time between them.

Firstly you will need to ensure that you have set the date and time on your Parent Unit's inbuilt clock.

Once you have done this, you can either:

1.Set the Time of day or night (24hr clock) at which your baby's next feed is due (eg. 10.30) and then if you wish,

2.Set the Interval between your baby's following feed start times, (eg. every 3hrs 30mins), be sure to include the time it takes to feed your baby.

3.Finally, you will need to switch the Feed Alarm on. Now, when your baby's next feed is due, your Parent Unit will start beeping and the Display will show "Feed Alarm". Pressing any button on the Parent Unit will silence the alert and you can feed your baby. If you have set the interval, the alert will sound again when the next feed is due.

Press [ ] key on the parent unit and use [ / ] keys to select "Feed Time", the display is shown below:

If your baby is in a routine of regular feeding intervals, you may wish to set your Baby Monitor to alert you when your

Image 19
Contents Baby Monitor Table of Contents Power requirements Cleaning and care Pack Contents InstallationGetting Started For the Baby Unit Baby unit Sender Your Baby MonitorLeft view of baby unit Parent unit Receiver Charger Pod Baby Unit Parent Unit LCD Display of Baby MonitorMonitoring Power On/OffAdjusting Volume Basic OperationLullaby Baby alertPaging Night lightClock TemperatureTime for a Feed Torch Low BatteryTalk to your Baby Out of RangeCharging the Battery Sensitivity Setting Menu SettingsNight light Setting Lullaby SettingSet On or Off Sound Alert SettingTemperature Setting Adjust VolumeSet temperature alert volume Clock SettingSet desired baby room temperature range Set temperature alertSet the time Feed Time SettingSet the hour format Set the first or next feed time Language SettingSet Alarm on or off Set Alarm VolumeProblem Possible causes TroubleshootingFeature Specifications Product SpecificationsWarranty Information Australia GuaranteeCustomer Support