Oricom SECURE 200 manual Getting Started, Installation, Pack Contents

Page 5

Getting Started 3

Thank you for choosing this monitor from Oricom.

Installation

Your Secure 200 Baby Monitor offers the best Digital Technology.

INTERFERENCE

FREE FREQUENCY

DECT (Digital Enhanced Cordless Telecommunications) is the most widely used worldwide digital cordless technology, offering amazingly clear sound, long range and maximum voice security.

DECT operates on the 1.8Ghz frequency which eliminates potential interference from other common wireless devices such as cordless telephones, wireless networks (Wi-Fi), Bluetooth and cordless

For the Parent Unit

1.Remove the Belt Clip by lifting the clip at the top and sliding it downwards.

2.Then remove the battery cover on the back of the Parent Unit by pressing and sliding it downwards.

Note:

clip

battery cover

computer devices.

Pack Contents

Depending on the model you have purchased this pack should contain the following items:

If any of these items are missing, please contact Oricom directly.

 

SC200

SC200-2

Parent unit (receiver)

1

2

Baby unit (sender)

1

1

Mains adaptor with charger pod

1

2

NiMH rechargeable battery pack

1

2

(2.4V, 750mAh)

 

 

Mains adaptor with power cord

1

1

Observe the correct polarity and direction of the battery pack when inserting. The black lip of the battery pack must be facing downwards as illustrated. The unit will not operate if the battery pack is inserted incorrectly.

3.Insert the rechargeable battery pack (supplied) as illustrated and close the battery cover again.

4.Place the Parent Unit into the Charger Pod.

5.Plug the mains adaptor into a mains power socket.

The red charger light on the charger pod will illuminate indicating that the Parent Unit is charging.

(the light will remain on to ensure optimum charge is maintained).

Image 5
Contents Baby Monitor Table of Contents Power requirements Cleaning and care Getting Started InstallationPack Contents For the Baby Unit Baby unit Sender Your Baby MonitorLeft view of baby unit Parent unit Receiver Charger Pod Baby Unit Parent Unit LCD Display of Baby MonitorAdjusting Volume Power On/OffBasic Operation MonitoringPaging Baby alertNight light LullabyTime for a Feed TemperatureClock Talk to your Baby Low BatteryOut of Range TorchCharging the Battery Night light Setting Menu SettingsLullaby Setting Sensitivity SettingTemperature Setting Sound Alert SettingAdjust Volume Set On or OffSet desired baby room temperature range Clock SettingSet temperature alert Set temperature alert volumeSet the hour format Feed Time SettingSet the time Set Alarm on or off Language SettingSet Alarm Volume Set the first or next feed timeProblem Possible causes TroubleshootingFeature Specifications Product SpecificationsWarranty Information Australia GuaranteeCustomer Support