Fisher-Price M2055 manual Assembly

Assembly

IMPORTANT! Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.

Turn Tube Ends Up

1 Seat Back Tube

•Place the seat back tube face down, as shown.

•Turn the ends of the tube upright.

Front Base

2 Seat Back Tube Handles

•Insert the ends of the front base into the holes in the handles. Hint: If you cannot insert the front base into the handles, turn the seat back tube over and try again!

•Insert two 4 mm x 20 mm screws through the hole in the handles and the ends of the front base.Tighten the screws.

Hint: If the screw does not easily insert through the hole in the handle and front base, you may not have pushed the front base completely into the handle. Push the front base into the handle to align the holes and then insert the screw.