ASSEMBLY
The four levers of machine controls must be operated from the tractor seat. During this operation ensure no one is standing on or among the linkage arms or bars. Set tractor hydraulics to position control. Never allow anyone below the frame unless it is securely blocked up.
Check the welded in pins between the stabilizers jaws are in contact with the mounting rail. If not the machine must be lowered to the ground and the next higher hole on the stabilizer valve selected, the machine raised and contact checked. Repeat again in the third hole if necessary. On subsequent fitting to the same tractor the hole selected is always used.
•Adjust the top link to bring the frame of the machine into the vertical position.
RMB 1865 11/10 | Assembly Section |
© 2010 Alamo Group Inc.
ASSEMBLY
