Testing Sound Reception
Power Button and L.E.D.
Range Indicator |
|
|
| Sound Lights |
|
|
•Place a receiver in the room where you intend to use it.
•Press the power button to turn the power ON. Wait a few seconds to see if you have a good signal. If the range indicator light blinks along with beeping, you are out of range. Move the receiver closer to the transmitter.
Hint: If you’d like to use AC power, use the AC adaptor/charger.
•When sound is picked up by a receiver, the sound lights turn on.
-One or two lights indicate quieter sounds.
-Three or more lights indicate louder sounds.
11