Center/Edge Erase—Erasing Center And Edge Margins
17
1
Center/Edge Erase—Erasing Center And Edge Margins
When printing from thick books, or
similar originals, the binding margin
at the center and the edges might ap-
pear on prints. To prevent this, follow
the steps below.
Note
As a default setting, the paper sizes
and directions that can be used are
as follows:
If you want to use other size origi-
nals, you can register the size using
Service Program mode (See P.55
“Service Program Menu”).
The margin width to be erased can
be adjusted with Service Program
mode (See P.55 “Service Program
Menu”).
APress the {
{{
{Center/Edge Erase}
}}
} key
twice to select the Center/Edge
Erase mode.
Check Indicator is blinking and
is shown in the guidance dis-
play.
Note
To cancel this mode, press the
{Center/Edge Erase} key again.
BPress the {
{{
{}
}}
} or {
{{
{}
}}
} key to se-
lect the paper size and direction.
Metric
version
B4L, A4L, A5K, A5L,
B5K, B5L
Inch
version
81/2" × 14"L, 81/2" × 11"L,
51/2" × 81/2"L, 51/2" × 81/2"K
GRMARG0E
TSLS01CN
TSLS01DN