Selecting Original Type

23

1
Selecting Original Type
Select one of the following three types
to match your originals:

Photo mode

Delicate tones of photographs and
pictures can be reproduced with
this mode.

Letter mode

Select this mode when your origi-
nals contain only letters (no pic-
tures).

Letter/Photo mode

Select this mode when your origi-
nals contain photographs or pic-
tures with letters.
Note
Moire patterns might occur when
screened originals are printed.
When using Photo mode to print
originals with both letter and pho-
tographs, the letter will appear
lighter. To avoid this, select Let-
ter/Photo mode with the {Type of
Original} key.
APress the {
{{
{Type of Original}
}}
} key to
select Photo mode.
BPress the {
{{
{Image Density}
}}
} key to
adjust the image density.
CSet your originals on the exposure
glass or in the optional document
feeder.
DPress the {
{{
{Start}
}}
} key.
ECheck the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see P.8 “Shift-
ing The Print Image Position For-
ward Or Backward”) or the side
table fine adjusting dial (see
P.8 “Shifting The Print Image Po-
sition To The Right Or Left”).
FMake your prints.
TSLS01EN
TSLS016N
TSLS012N