OPERATION
6
1
EPress the {
{{
{Proof}
}}
} key and check
the image density and the image
position of the proof print.
Note
❒If the image position is not cor-
rect, adjust it using the {Image
Position} keys or the fine adjust-
ment dial. See ⇒ P.8 “Adjusting
The Print Image Position”.
❒If the image density is slightly
dark or light, adjust the image
density using the {W} or {V}
key. See ⇒ P.10 “Adjusting The
Print Image Density”.
FEnter the number of prints re-
quired with the {
{{
{Number}
}}
} keys.
Note
❒Up to 9999 prints can be entered
at one time.
❒To change the number entered,
press the {Clear/Stop} key and
enter the new number.
GPress the {
{{
{Print}
}}
} key.
Note
❒After printing is completed, the
same number of prints is auto-
matically set for the next job.
❒To stop the machine during the
multi-print run, press the {Clear/
Stop} key.
❒To return the machine to the ini-
tial condition after printing,
press the {Clear Modes} key.
TSLS013N
TSLS011N
TSLS014N