REPLENISHING SUPPLIES
74
4
Master Roll Replacement
The Master End indicator (C) is lit
when it is time to replace the master
roll.
A Open the original table.
Note
Lift the original table release le-
ver and lift the original table.
B Open the right side cover.
COpen the plotter cover.
D Remove the used master roll and
pull out both spools. Then, insert
both spools into a new master
roll.
Note
When the Master End indicator
lights, it is necessary to replace
the master roll even if some
master remains on the old roll.
E The new master roll must be po-
sitioned as shown in the illustra-
tion.
TSLH01SE
TSLH01TE
TSLH02EE
TSLT010E
TSLH01XE