WHAT TO DO IF SOMETHING GOES WRONG
80
5
R
CAUTION:
Note
❒To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒When clearing misfeeds, do not turn off the main switch. If you do, your copy
settings are cleared.
❒If misfeeds occur repeatedly, contact your service representative.
❖
❖❖
❖When the open cover/unit indicator (M
MM
M) blinks
❖
❖❖
❖When the supply/exchange indicators blink
❖
❖❖
❖When other indicators blink
•
Be careful not to cut yourself on any sharp edges when you reach
inside the machine to remove misfed sheets of paper or masters.
Monitor Guidance Display and Action Page
MCLOSE THE COVER
• Close the original table unit.
• Close the front door.
⇒ P.95 “When The Open Cover/Unit In-
dicator (M) Blinks”
CLOSE THE PLOTTER COVER
• Close the right side cover and
the plotter cover.
CLOSE THE ADF COVER
• Close the optional ADF unit.
⇒ P.95 “When The Open Cover/Unit In-
dicator (M) Blinks”
SET THE DRUM COMPLETELY
Monitor Guidance Display and Action Page
BLOAD MORE PAPER ⇒ P.69 “Loading Paper On The Paper
Feed Table”
jLOAD NEW INK CARTRIDGE ⇒ P.71 “When The Add Ink Indicator (j)
Blinks”
CLOAD NEW MASTER ROLL ⇒ P.74 “Master Roll Replacement”
kEMPTY MASTER EJECT BOX
• Remove the used master.
⇒ P.97 “When The Master Eject Indica-
tor (k) Blinks”
SET THE MASTER EJECT BOX
Monitor Guidance Display and Action Page
uSET THE KEY COUNTER ⇒ P.98 “When Other Indicators Blink”