WHAT TO DO IF SOMETHING GOES WRONG
84
5
Originals lighter than 40 g/m2, 10.6 lb (when setting one original at a time)
Carbon coated originals
Damaged originals
Originals with glue on them
Originals perforated for ring binders
Book originals
Originals written with a pencil or ball-point pen
Originals smaller than 148 mm × 105 mm, 5.8" × 4.1"
Originals larger than 257 mm × 364 mm, 10.2" × 14.4"
Folded, curled, creased originals
Bound, stapled, or clipped originals
OHP transparencies
Translucent paper
Pasted originals
Note
If you use paste-up originals, make sure the pasted parts hold firmly to the
base sheet and press the {Paste Shadow Erase} key. If the thickness of the paste-
up original is more than 0.1 mm, and the space between the pasted parts is
less than 2 mm, 0.08", a shadow might appear on the prints.
The first 5 mm, 0.2" of the leading edge cannot be printed. Make sure the lead-
ing edge margin is at least 5 mm, 0.2".
a: 5 mm, 0.2"
Do not mix different sizes of originals in the optional document feeder.
Clean the separation roller if it is dirty. (A dirty separation roller might slip
and cause original misfeeds.)
Remove staples or clips of originals. Fan originals that have had staples or
clips removed.
Original Print
a