Skip Feed Printing
35
1
Skip Feed Printing
If the backs of prints are dirty, you
can increase the time between two
prints using the {Skip Feed} key. In
the default setting, when one sheet of
paper is fed the drum rotates twice.
However, you can select the number
of rotations of the drum. This gives
you the chance to remove prints one
by one from the paper delivery table
or insert one sheet of paper between
two prints.
ASet your originals on the exposure
glass or in the optional document
feeder.
BWhile holding down the {
{{
{Skip
Feed}
}}
} key, select the number of
rotations of the drum while one
sheet of paper is fed with the
{
{{
{Number}
}}
} keys.
Note
You can select from 1 to 9 rota-
tions.
The beeper sounds after you set
the number of rotations.
CPress the {
{{
{Start}
}}
} key.
DCheck the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see P.8 “Shift-
ing The Print Image Position For-
ward Or Backward”) or the side
table fine adjusting dial (see
P.8 “Shifting The Print Image Po-
sition To The Right Or Left”).
EEnter the number of prints with
the {Number} keys.
FMake your prints.
TSLS01YN
TSLS012N
TSLS011N