53
3. SERVICE PROGRAM MODE

Accessing Service Programs

The service programs can be set by
following this procedure.
Reference
For the service program menu, see
P.55 “Service Program Menu”.
APress the {
{{
{Clear Modes}
}}
} key.
BHold down the {
{{
{Clear/Stop}
}}
} key
for at least 3 seconds.
The SP-mode display appears on
the guidance display.
Note
If you press the wrong key, try
pressing the above keys from
the beginning.
CWith the {
{{
{Number}
}}
} keys, enter the
desired service program number
(SP No.).
Reference
For the SP No., see P.55 “Ser-
vice Program Menu”.
When you want to leave the
service program mode
APress the {
{{
{Clear Modes}
}}
} key.
Reference
If you want to change the set-
tings of a selected service
program, see P.54 “Chang-
ing The Settings Of Service
Programs”.
TSLS01UN
TSLS01AN
TSLS011N
TSLS01UN